Home » Products » LandMark™ » AHRS »DIGS™100

 

DIGS™100 Downhole Inertial Orientation & Guidance Sensor

 

Quick-Access Documents

DIGS™100 DataSheet PDF

DIGS™100 User Guide PDF

Applications

 

The LandMark™01 IMU offers wide

application usage:

 

• airborne platform stabilization

EO/IR stabilization

• antenna stabilization & pointing

• LIDAR stabilization

• navigation

• flight testing

 

 

Similar Products

 

LandMark™50 IMU (Inertial Measurement Unit)

LandMark™21 IMU (Inertial Measurement Unit)

 

 

  • General
  • Features
  • Specification
  • Documentation

 

DIGS100

Downhole Inertial Guidance System (DIGS)

 

The DIGS™100 Downhole Inertial Guidance Systems is our new AHRS designed specifically for downhole orienation and directional guidance applications. It is ideal for directional drilling in support of utilities i.e. power lines, telco etc. or in vertical wells. It is tested to and meets IP68. This small and rugged MEMS AHRS provides internally temperature compensated RS422/RS485 output of pitch, roll and yaw angles.

 

This AHRS features a small size of 1” Diameter X 2.125” Length enabling application versatility for users that have tight drilling space constraints while still demanding outstanding performance enabled by its low noise gyros and accelerometers.

 

Designed for guidance in utlity drilling applications, this AHRS is ideal for small utility drilling applications requiring high accuracy with very small size.

 

 

 

DIGS100

  • Downhole Inertial Orientation & Guidance Sensor

 

The DIGS™100 Downhole Inertial Guidance Systems is our new AHRS designed specifically for downhole orienation and directional guidance applications. It is ideal for directional drilling in support of utilities i.e. power lines, telco etc. or in vertical wells. It is tested to and meets IP68. This small and rugged MEMS AHRS provides internally temperature compensated RS422/RS485 output of pitch, roll and yaw angles

 

•  1” Diameter X 2.125” Length 

•   Yaw Angle 0.5°

•   Pitch and Roll Angles 0.1°

•   5°/hr in-run bias stability

•   0.003°/sec/√Hz angle random walk

•   RS422/ RS485 Serial Data Format

•   Data Rate 1 kHz (user selectable)

 

Available Configurations:

DIGS100-490-10-100
bullet
Downhole Orientation Module
bullet
Rugged Environmentally Sealed Packaging Meets IP68
bullet
NON-ITAR Low Noise MEMS AHRS
bullet
1” Diameter X 2.125” Length
bullet
Yaw Angle 0.5° 1σ
bullet
Pitch and Roll Angles 0.1° 1σ
bullet
•In-Run Gyro Bias 5°/hour 1σ
bullet
Low Gyro Noise 0.003º/sec/√Hz
bullet
Low Accel Noise 0.1mg/√Hz
bullet
Light Weight 38 grams
bullet
Compensated Misalignment 1mrad
bullet

and g-Sensitivity <0.01°/sec/g 1σ

bullet
External Sync (1 kHz or 1 pps)
bullet
Low Power <300 mW Maximum
bullet
Low Voltage +3.3V (single sided power)
bullet
Small Size < 27.4cm3/1.7in3
bullet
Wide Sensor Bandwidth 250 Hz
bullet
RS422/RS485 Serial Interface
bullet
Data Rate 100Hz or 200Hz (AHRS mode)
bullet
Fully Temperature Compensated Bias & Scale Factor
bullet
Precision Alignment
bullet
Export Classification: Commerce ECCN7A994 (NLR)

Datasheet & Technical User Guide

DIGS™100 Product DataSheet PDF

DIGS™100 Technical User Guide PDF

 

Outline Drawing & Solid Model

DIGS™100 Outline Drawing PDF

DIGS™100 STEP File

 

Free .STEP File Reader available at: http://www.ida-step.net/

 

C-Code Library & SDK Software

LandMark™ C-Code Library

SetupGlamrIMU_5p61.msi

LandMark™01 IMU SDK Datasheet PDF

 

Product Test Data

DIGS™100 ATP Test Data PDF

 

 

 

 

How to Buy

 

To discuss configuration for your specific system requirements, please use our Contact page.

 

For large quantity orders or OEM discussions, please contact sales@gladiatortechnologies.com.

 

If you are outside the US, please contact one of our representatives.