Home » Products » LandMark™ » IMU's » LandMark™30

 

LandMark™30 IMU

 

Quick-Access Documents

LandMark™30 IMU DataSheet PDF

LandMark™30 IMU User Guide PDF

Applications

 

The LandMark™30 IMU offers wide

application usage:

 

airborne platform stabilization

EO/IR stabilization

• antenna stabilization & pointing

• LIDAR stabilization

• flight testing

• racing yacht marine compass

 

Similar Products

 

LandMark™30 VG (Vertical Gyro)

LandMark™30 AHRS (Attitude & Heading

Reference System)

LandMark™30 VG/GPS (GPS-Aided

Vertical Gyro)

LandMark™30 GPS/AHRS (GPS-Aided

Attitude & Heading Reference System)

The LandMark™30 IMU is Form, Fit, Function Interchangeable with the:

LandMark™50 Inertial Measurement Unit

 

 

  • General
  • Features
  • Specification
  • Documentation

 

LMRK30IMU

Inertial Measurement Unit

 

The LandMark™30 IMU offers superior performance with a wide input power range and features our low noise MEMS gyros and accelerometers that enable outstanding bias in-run and bias over temperature. This high performance MEMS Inertial Measurement Unit (IMU) provides internally temperature compensated RS485 output of delta velocity and delta theta.

 

This high performance MEMS Inertial Measurement Unit (IMU) provides internally temperature compensated RS422/RS485 output of delta velocity and delta theta.

 

Designed for commercial stabilization and aircraft applications this IMU is ideal for applications requiring high inertial performance approaching “FOG-Class”, yet available at much lower cost.

 

 

 

LMRK30IMU

  • 6 Degrees of Freedom MEMS IMU

 

The low noise MEMS gyros & accels enable precision measurement including excellent in-run bias and bias over temperature. The IMU’s performance is optimized with fully temperature compensated bias and scale factor and compensated misalignment and g-sensitivity.

 

The unit is environmentally sealed in a rugged enclosure and Mil-Spec connector in order to withstand environmental vibration and shock typically associated with commercial aircraft requirements.


•   8°/hr in-run bias stability
•   0.003°/sec/√Hz angle random walk

•   RS485 Serial Data Format

•   Data Rate 500 Hz (user selectable)

•   Simple integration supported by SDK

 

Available Configurations:

LMRK30IMU-100-02-100 or -06 or -10
LMRK30IMU-175-02-100 or -06 or -10
LMRK30IMU-300-02-100 or -06 or -10
bullet
LandMark™ 30 IMU "LN Series"
bullet
High Performance and Low Noise Silicon MEMS Digital IMU
bullet
Low Gyro Noise 0.003°/sec/√Hz
bullet
Low Accel Noise 0.04mg/√Hz
bullet
In Run Gyro Bias 8°/hour 1σ
bullet
Fully Temperature Compensated Bias and Scale Factor
bullet
Compensated Misalignment 1mrad and g-Sensitivity <0.01°/sec/g typical
bullet
Input Power +6v to +36V (single sided) (Input Transient Protection to 80V)
bullet
Light Weight 388 grams
bullet
Small Size < 321cm3/19.6in3
bullet
RS485 Data Rate 500 Hz (user selectable)
bullet
Wide Sensor Bandwidth 140 Hz
bullet
Bandwidth Filtering Capability
bullet
External Sync (1 kHz or 1 pps)
bullet
Precision Alignment
bullet
Vibration Isolation 6 gRMS
bullet
Shock Resistant 500g's
bullet
6 Internal Temp. Sensors
bullet
Self Test
bullet
No Wearout Modes for Long Life
bullet
Export Classification: Commerce ECCN7A994

 

 

How to Buy

 

To discuss configuration for your specific system requirements, please use our Contact page.

 

For large quantity orders or OEM discussions, please contact sales@gladiatortechnologies.com.

 

If you are outside the US, please contact one of our representatives.