The LandMark™10 VG offers wide
• airborne platform stabilization
• EO/IR stabilization
• antenna stabilization & pointing
• LIDAR stabilization
• flight testing
• racing yacht marine compass
LandMark™10 IMU (Inertial Measurement Unit)
LandMark™10 AHRS (Attitude & Heading
LandMark10™ VG/GPS (GPS-Aided
LandMark™10 GPS/AHRS (GPS-Aided
Attitude & Heading Reference System)
The LandMark™10 VG is Form, Fit, Function Interchangeable with the:
The LandMark™10 VG builds upon the extensive LandMark™ 10 IMU and AHRS product lineage and is now offered with a substantially improved upgrade employing our latest low noise gyro technology for improved bias and with improved environmental sealing and MIL-SPEC connector.
The signature feature of the unit is the accurate pitch & roll angle performance, which is optimized with fully temperature compensated bias and scale factor, compensated misalignment and g-sensitivity.
This VG is ideal for applications requiring low cost, ultra low power consumption, rugged packaging, small size, light weight and no inherent wear out modes for long life.
- 6 Degrees of Freedom MEMS VG
The LandMark™ VG provides pitch and roll angles, delta velocity (meters/second and delta theta (degrees) as well as temperature outputs. Utilizing Gladiator's proprietary thermal modeling process, this unit is fully temperature compensated, with corrected bias, scale factor, misalignment and g-sensitivity.
• 25°/hr in-run bias stability
• 0.014°/sec/√Hz angle random walk
• RS485 Serial Data Format
• 140 Hz Wide Sensor Bandwidth
• Simple integration supported by SDK
|Low Cost & Rugged Vertical Gyro|
|Pitch and Roll Angles ±0.25° Stationary 1σ|
|Low Gyro Noise 0.012°/sec/√Hz 1σ|
|Low Accel Noise 0.07mg/√Hz 1σ|
|In Run Gyro Bias 25°/hour 1σ|
|Fully Temperature Compensated Bias and Scale Factor|
|Compensated Misalignment 1mrad and g-Sensitivity <0.03°/sec/g 1σ|
|Low Power 300 mW typical|
|Input Power +3.1V to +5.5V (single sided)|
|Light Weight 102 grams|
|Small Size < 72cm3/4.4in3|
|RS485 Data Rate 100 Hz (user selectable)|
|Wide Sensor Bandwidth 140 Hz|
|Bandwidth Filtering Capability|
|External Sync (1 kHz or 1 pps)|
|Internal Vibration Isolation 6 gRMS|
|Shock Resistant 500g's|
|3 Internal Temperature Sensors|
|No Wearout Modes for Long Life|
|Export Classification: Commerce ECCN7A994|
Datasheet & Technical User Guide
Oultline Drawing & Solid Model
Free .STEP File Reader available at: http://www.ida-step.net/
Product Test Data
How to Buy
To discuss configuration for your specific system requirements, please use our Contact page.
For large quantity orders or OEM discussions, please contact firstname.lastname@example.org.
If you are outside the US, please contact one of our representatives.