The LandMark™30 VG offers wide
• airborne platform stabilization
• EO/IR stabilization
• antenna stabilization & pointing
• LIDAR stabilization
• flight testing & navigaion
• racing yacht marine compass
LandMark™30 IMU (Inertial Measurement Unit)
LandMark™30 AHRS (Attitude & Heading
LandMark™30 VG/GPS (GPS-Aided
LandMark™30 GPS/AHRS (GPS-Aided
Attitude & Heading Reference System)
The LandMark™30 VG is Form, Fit, Function Interchangeable with the:
The LandMark™30 VG is our premium performance model offering pitch and roll angle output of 0.25° and featuring both our lowest noise MEMS G100Z gyros and accelerometers that offer outstanding bias in-run and bias over temperature. The MEMS performances offered in this VG are open-loop FOG class, but available at much lower cost.
The signature feature of the unit is the accurate pitch & roll angle performance, which is optimized with fully temperature compensated bias and scale factor, compensated misalignment and g-sensitivity.
This VG is ideal for applications requiring low cost, ultra low power consumption, rugged packaging, small size, light weight and no inherent wear out modes for long life.
- 6 Degrees of Freedom MEMS VG
The LandMark™ VG provides pitch and roll angles, delta velocity (meters/second and delta theta (degrees) as well as temperature outputs. Utilizing Gladiator's proprietary thermal modeling process, this unit is fully temperature compensated, with corrected bias, scale factor, misalignment and g-sensitivity.
• 8°/hr in-run bias stability
• 0.003°/sec/√Hz angle random walk
• RS485 Serial Data Format
• 500 Hz Wide Sensor Bandwidth
• Simple integration supported by SDK
|LMRK30VG-100-02-200||or -06||or -10|
|LMRK30VG-175-02-200||or -06||or -10|
|LMRK30VG-300-02-200||or -06||or -10|
|High Performance and Low Noise Silicon MEMS Digital Vertical Gyro|
|Low Gyro Noise 0.003°/sec/√Hz|
|Low Accel Noise 0.04/√Hz|
|In Run Gyro Bias 8°/hour 1σ|
|Pitch and Roll Angles ±0.25°typical|
|Fully Temperature Compensated Bias and Scale Factor|
|Compensated Misalignment 1mrad and g-Sensitivity <0.01°/sec/g typical|
|Input Power +6v to +36V (single sided) (Input Transient Protection to 80V)|
|Light Weight 388 grams|
|Small Size < 321cm3/19.6in3|
|RS485 Data Rate 100 Hz (user selectable)|
|Wide Sensor Bandwidth 500 Hz|
|Bandwidth Filtering Capability|
|External Sync (1 kHz or 1 pps)|
|Vibration Isolation 6 gRMS|
|Shock Resistant 500g's|
|6 Internal Temp. Sensors|
|No Wearout Modes for Long Life|
|Export Classification: Commerce ECCN7A994|
Datasheet & Technical User Guide
Oultline Drawing & Solid Model
Product Test Data
How to Buy
To discuss configuration for your specific system requirements, please use our Contact page.
For large quantity orders or OEM discussions, please contact email@example.com.
If you are outside the US, please contact one of our representatives.