MRM30 Analog IMU
The MRM30 IMU offers wide
• airborne platform stabilization
• EO/IR stabilization
• antenna stabilization & pointing
• LIDAR stabilization
• flight testing
• racing yacht marine compass
LandMark™30 IMU (Digital Inertial Measurement Unit)
MRM10 IMU (Analog Inertial Measurement Unit)
MRM20 IMU (Analog Inertial Measurement Unit)
MRM40 IMU (Analog Inertial Measurement Unit)
MRM50 IMU (Analog Inertial Measurement Unit)
Inertial Measurement Unit
The MRM30 IMU (Motion Reference Monitoring) is a form, fit and function analog derivative from our standard digital LandMark™ 30 IMU. It employs our own gyros and accelerometers which offer both low noise and excellent bias. It also offers environmental sealing, MIL-SPEC connector and a wide input power range.
The MRM30 IMU is ideal for applications requiring simple analog outputs, low cost, low power consumption, rugged packaging, small size, light weight and no inherent wear out modes for long life.
The unit is highly durable and can withstand environmental vibration and shock typically associated with motorsports racing and commercial aircraft requirements.
- 6 Degrees of Freedom MEMS IMU
Utilizing Gladiator's proprietary thermal modeling process, this unit is fully temperature compensated for bias and scale factor and also corrected for misalignment and g-sensitivity. The low noise MEMS gyros & accels enable precision measurement including excellent in-run bias and bias over temperature.
• 8°/hr in-run bias stability
• 0.003°/sec/√Hz low gyro noise
- • 0.04°/√Hz low accel noise
|MRM30IMU-025-02-100||or -06||or -10|
|MRM30IMU-100-02-100||or -06||or -10|
|MRM30IMU-175-02-100||or -06||or -10|
|MRM30IMU-300-02-100||or -06||or -10|
|High Performance and Low Noise Silicon MEMS Analog IMU|
|Low Gyro Noise 0.003°/sec/√Hz|
|Low Accel Noise 0.04mg/√Hz|
|In Run Gyro Bias 8°/hour 1σ|
|Fully Temperature Compensated Bias and Scale Factor|
|Compensated Misalignment 1mrad and g-Sensitivity <0.01°/sec/g typical|
|Input Power +6v to +36V (single sided) (Input Transient Protection to 80V)|
|Light Weight 392 grams|
|Small Size < 321cm3/19.6in3|
|Simple Analog Output|
|Wide Sensor Bandwidth 140 Hz|
|External Sync (1 kHz or 1 pps)|
|Vibration Isolation 6 gRMS|
|Shock Resistant 500g's|
|6 Internal Temp. Sensors|
|No Wearout Modes for Long Life|
|Export Classification: Commerce ECCN7A994|
How to Buy
To discuss configuration for your specific system requirements, please use our Contact page.
For large quantity orders or OEM discussions, please contact email@example.com.
If you are outside the US, please contact one of our representatives.