A300D Accelerometer
New high dynamic, three-axis digital accelerometer
The new A300D Accelerometer is Gladiator Technologies’ ultra-low noise three axis MEMS accelerometer with high dynamic range sensors. At only 0.6 cubic inches, the A300D accelerometer comes factory calibrated over the full temperature range, conditioned over environments.
Product Highlights
±40 g
Sensor Range
0.058 mg /√Hz
VRW
0.5 mg
Bias Over Temperature
Message Delay
Cubic Inches
Bandwidth
Overview
- Low Noise. High Speed.
The A300D three axis MEMS accelerometer is equipped with low noise sensors, cutting edge VELOX™ processing and user configurable firmware with the most advanced features available.
- VELOX™ High Speed Processing
Gladiator Technologies’ cutting edge data processing suite enabling filtered digital output without sacrificing inertial performance.
- Factory Calibrated
Gladiator Inertial products are factory calibrated, modeled and conditioned over temperature, -50°C to +85°C, shock and vibration.
Specifications
G
Range
VRW
Bias In-Run
Bias Over Temp.
LSB for 24-bit
Scale Factor Error
Alignment
.
±40 g
0.058 mg /√Hz
0.015 mg
0.5 mg
0.004688 mg
≤ 0.02%
0.5 mrad
±40 g
Range
0.058 mg /√Hz
VRW
0.015°/h
Bias In-Run
0.5 mg
Bias Over Temp.
0.004688 mg
LSB for 24-bit
0.00075 mg/g²
G²
≤ 0.02%
Scale Factor Error
0.5 mrad
Alignment
Shock
Vibration
Calibrated Temp
Non-Operating Temp
1000g
10 gRMS (50 Hz to 2 kHz)
-50°C to 85°C
-55°C to 105°C
1000g
Shock
10 gRMS (50 Hz to 2 kHz)
Vibration
-50°C to 85°C
Calibrated Temp
-55°C to 105°C
Non-Operating Temp
G
Update Rate
External Sync
Data Format
Max Bandwidth
Max Baud Rate
Digital Message Delay
Up to 5 kHz
Up to 8 kHz
16/24/32-bit (user selectable)
800 Hz
3.0 Mbaud
44 µs
Up to 5 kHz
Data Rate
Up to 8 kHz
External Sync
16/24/32-bit (user selectable)
Data Format
800 Hz
Max Bandwidth
3.0 Mbaud
Max Baud Rate
44 µs
Digital Message Delay
Input Voltage
Power Consumption
+5.0 V to +5.5 V Max
275 mW Typical / 375 mW Maximum
+5.0 V to +5.5 V Max
Input Voltage
275 mW Typical / 375 mW Maximum
Power Consumption
Mass
Size (US)
Size (Metric)
19.25 grams ±0.5
1.0 x 1.0 x 0.6 = 0.6 in³
19.25 grams ±0.5
Mass
1.0 x 1.0 x 0.6 = 0.6 in³
Size (US)
2.54 x 2.54 x 1.65 = 10.65 cm³
Size (Metric)
Need More Information?
Related Products
G300D Gyroscope
LandMark™ 005 IMU
LandMark™ 007 IMU
LandMark™ 007X IMU
Contact Us
Additional Links
Contact Us
Gladiator Technologies
35329 SE Center St
Snoqualmie, WA 98065
Tel: 425.363.4180
Email: sales@gladiatortechnologies.com