Gladiator Technologies’ Inertial Measurement Units (IMUs) feature low noise MEMS sensors and VELOX™ high speed processing are ideal for precision motion measurement in SWaP constrained applications. Our IMUs pass extensive factory testing and calibration over environmental conditions including temperature, shock and vibration. IMUs by Gladiator Technologies are a preferred solution by engineers for applications all over the world.
Inertial Measurement Units
High Dynamic Products
VELOX™ Processing
SWaP-C Design
Inertial Measurement Units
LandMark™005 IMU
The LandMark™005 IMU is Gladiator Technologies’ high speed, six-axis MEMS Inertial Measurement Unit (IMU) equipped with low noise sensors, VELOX™ high speed processing and user configurable firmware. Only 0.6 cubic inches, the LandMark™005 comes factory calibrated over the full temperature range, conditioned over environments.
490°/s Gyroscopes
15g Accelerometers
0.6
Cubic Inches
0.0017°/s/√Hz
ARW
0.075°/s
Bias Over Temperature
600Hz
Bandwidth
10kHz
Data Rates
<29µs
Message Delay
LandMark™007 IMU
High speed, six-axis IMU built for high dynamic environments.
This IMU is equipped with low noise sensors and VELOX™ high speed processing and user configurable firmware. Only 0.7 cubic inches, the LandMark™007 comes factory calibrated over the full temperature range and conditioned over environment.
2000°/s Gyroscopes
98g Accelerometers
2000°/s
Rate Range
0.0025°/s/√Hz
ARW
0.075°/s
Bias Over Temperature
98g
Accel Range
10kHz
Data Rates
<114µs
Message Delay
LandMark™007X IMU
High Dynamic 6 Axis IMU
The LandMark™007X IMU is Gladiator Technologies’ high speed, six-axis MEMS Inertial Measurement Unit (IMU) built for high dynamic environments. This IMU is equipped with low noise sensors and VELOX™ high speed processing and user configurable firmware. Only 0.7 cubic inches, the LandMark™007X comes factory calibrated over the full temperature range, conditioned over environments
2000°/s Gyroscopes
200g Accelerometers
2000°/s
Rate Range
0.0017°/s/√Hz
ARW
0.1°/s
Bias Over Temperature
200g
Accel Range
10kHz
Data Rates
<114µs
Message Delay
LandMark™60LX IMU
Ultra Low VRW
LandMark™65 IMU
High Dynamic
MRM60 IMU
Analog Output
490°/s Gyroscopes
15g Accelerometers
28ug/s/√Hz
Accel VRW
0.0016°/sec/√Hz
ARW
VELOX™
High Speed Processing
2000°/s Gyroscopes
40g Accelerometers
1000g
Shock Rating
0.002°/sec/√Hz
ARW
VELOX™
High Speed Processing
490°/s Gyroscopes
15g Accelerometers
28ug/s/√Hz
Accel VRW
0.0016°/sec/√Hz
ARW
VELOX™
High Speed Processing
The LandMark™60LX IMU is Gladiator Technologies’ High Performance six-axis MEMS IMU with exceptionally low accelerometer noise (28µg VRW). This IMU is factory calibrated over the full temperature range, conditioned over environments and is ideal for stabilization, navigation and precision measurement applications.
The LandMark™65 IMU is a high dynamic six-axis MEMS IMU. This IMU is designed and built for the most demanding dynamic environments, calibrated over temperature and is powered with VELOX™ Processing for low latency high output rates. This IMU is ideal for high dynamic applications that require precision motion measurement
The MRM60 Analog IMU is a High Performance six-axis MEMS IMU with Analog Output. Equipped with low noise sensors, the MRM60 IMU delivers precision measurement with analog outputs in either ± 2.5 volt or ± 5 volt ranges. This IMU is ideal for precision measurement applications critical in rail, industrial, and automotive industries.
LandMark™60 IMU
Standard 6-Axis IMU
LandMark™60VG
Vertical Gyro
LandMark™01 IMU
Low Cost IMU
490°/s Gyroscopes
15g Accelerometers
3°/h
Bias Stability
0.0016°/sec/√Hz
ARW
VELOX™
High Speed Processing
490°/s Gyroscopes
15g Accelerometers
0.1°
Pitch and Roll Angles
0.002°/sec/√Hz
ARW
VELOX™
High Speed Processing
490°/s Gyroscopes
15g Accelerometers
1
Cubic Inch
0.0035°/sec/√Hz
ARW
VELOX™
High Speed Processing
The LandMark™60 IMU is a High Performance six-axis MEMS Inertial Measurement Unit. Equipped with low noise sensors, VELOX™ processing and user configurable firmware, the LandMark™60 delivers precision measurement. This IMU is factory calibrated over the full temperature range, conditioned over environments and is ideal for stabilization, navigation and precision measurement applications.
The LandMark™60VG provides pitch and roll angle outputs. Utilizing the same hardware as the LandMark™60LX, this low noise inertial system is ideal for measurement applications. Optional protocol of RS485 or CANbus.
The LandMark™01 IMU is an affordable, low noise, six-axis MEMS IMU. Unlike other low priced alternatives, this compact IMU comes factory calibrated over the full temperature range and is conditioned over environments. The LandMark™01’s low cost, small size, and excellent performance make it ideal for applications in stabilization, low cost navigation, and flight testing.
LandMark™005 IMU
The LandMark™005 IMU is Gladiator Technologies’ high speed, six-axis MEMS Inertial Measurement Unit (IMU) equipped with low noise sensors, VELOX™ high speed processing and user configurable firmware. Only 0.6 cubic inches, the LandMark™005 comes factory calibrated over the full temperature range, conditioned over environments.
0.6
Cubic Inches
0.0018°/s/√Hz
ARW
0.075°/s
Bias Over Temperature
600Hz
Bandwidth
10kHz
Data Rates
<115µs
Message Delay
LandMark™007 IMU
This IMU is equipped with low noise sensors and VELOX™ high speed processing and user configurable firmware. Only 0.7 cubic inches, the LandMark™007 comes factory calibrated over the full temperature range and conditioned over environment.
98g
Accel Range
2000°/s
Rate Range
10kHz
Data Rates
0.0025°/s/√Hz
ARW
<115µs
Message Delay
0.075°/s
Bias Over Temperature
LandMark™007X IMU
The LandMark™007X IMU is Gladiator Technologies’ high speed, six-axis MEMS Inertial Measurement Unit (IMU) built for high dynamic environments. This IMU is equipped with low noise sensors and VELOX™ high speed processing and user configurable firmware. Only 0.7 cubic inches, the LandMark™007X comes factory calibrated over the full temperature range, conditioned over environments
200g
Accel Range
2000°/s
Rate Range
10kHz
Data Rates
0.002°/s/√Hz
ARW
<115µs
Message Delay
0.075°/s
Bias Over Temperature
LandMark™60LX IMU
Ultra Low VRW
490°/s Gyroscopes
15g Accelerometers
28ug/s/√Hz
Accel VRW
0.0016°/sec/√Hz
ARW
VELOX™
High Speed Processing
The LandMark™60LX IMU is Gladiator Technologies’ High Performance six-axis MEMS IMU with exceptionally low accelerometer noise (28µg VRW). This IMU is factory calibrated over the full temperature range, conditioned over environments and is ideal for stabilization, navigation and precision measurement applications.
LandMark™65 IMU
High Dynamic IMU
2000°/s Gyroscopes
40g Accelerometers
1000g
Shock Rating
0.002°/sec/√Hz
ARW
VELOX™
High Speed Processing
The LandMark™65 IMU is a high dynamic six-axis MEMS IMU. This IMU is designed and built for the most demanding dynamic environments, calibrated over temperature and is powered with VELOX™ Processing for low latency high output rates. This IMU ideal for high dynamic applications that require precision motion measurement
MRM60 IMU
Analog Output
490°/s Gyroscopes
15g Accelerometers
28ug/s/√Hz
Accel VRW
0016°/sec/√Hz
ARW
± 2.5 or ± 5
Reference Voltage
The MRM60 Analog IMU is a High Performance six-axis MEMS IMU with Analog Output. Equipped with low noise sensors, the MRM60 IMU delivers precision measurement with analog outputs in either ± 2.5 volt or ± 5 volt ranges. This IMU is factory calibrated over the full temperature range, conditioned over environments and is ideal for precision measurement applications critical in rail, industrial, and automotive industries.
LandMark™01 IMU
Low Cost
490°/s Gyroscopes
15g Accelerometers
1
Cubic Inch
0.0035°/sec/√Hz
ARW
VELOX™
High Speed Processing
The LandMark™01 IMU is an affordable, low noise, six-axis MEMS IMU. Unlike other low priced alternatives, this compact IMU comes factory calibrated over the full temperature range and is conditioned over environments. The LandMark™01’s low cost, small size, and excellent performance make it ideal for applications in stabilization, low cost navigation, and flight testing.
Gladiator Technologies is a leading designer and manufacturer of high performance MEMS inertial sensors, systems including IMUs, INS, Gyroscopes and Accelerometers.
Other Useful Links
Menu
Contact Us
Gladiator Technologies
35329 SE Center St
Snoqualmie, WA 98065
Tel: 425.363.4180
Email: sales@gladiatortechnologies.com